Installation
Step by Step GuidesTechno Guides
Laying Membrane Edge Trims Gutter Trim External Edge Corner Wall Trim Flashing Under Tiles Onto Tiles Wall Trim Flashing External Corner (Skylight / Upstand) Internal Corner Pipeseal Seam / Join Rainwater Outlet Horizontal Rainwater OutletLineflex Guides
Lineflex Heat Weld Laying Lineflex Laying Lineflex With Spray Adhesive Laying Lineflex With Mechanical Fixings Edge Trim Gutter Trim External Edge Corner Under Tiles Onto Tiles External Corner Internal Corner Pipe Seal Felt Join Butt Join Rainwater Outlet Horizontal Rainwater Outlet
Edge Trim Download PDF
A guide to installing edge trims to a Lineflex Fleece Backed EPDM flat roof.
Step 1
Install a 2" x 1" batten to the roof perimeter, level with roof deck.
Step 2
Once the membrane is installed, push down on the edge trim.
Step 3
Fix in place using the supplied polypins.
Step 4
Trim any excess rubber with a sharp blade.
Step 5
Please allow 5mm gap between trims for expansion and contraction.
