Installation
Step by Step GuidesTechno Guides
Laying Membrane Edge Trims Gutter Trim External Edge Corner Wall Trim Flashing Under Tiles Onto Tiles Wall Trim Flashing External Corner (Skylight / Upstand) Internal Corner Pipeseal Seam / Join Rainwater Outlet Horizontal Rainwater OutletLineflex Guides
Lineflex Heat Weld Laying Lineflex Laying Lineflex With Spray Adhesive Laying Lineflex With Mechanical Fixings Edge Trim Gutter Trim External Edge Corner Under Tiles Onto Tiles External Corner Internal Corner Pipe Seal Felt Join Butt Join Rainwater Outlet Horizontal Rainwater Outlet
Onto Tiles Download PDF
Step by step guide on installation EPDM membrane onto tiles. Installation videos & step-by-step guides for full installation available.
Step 1
Allow 150mm overhang onto tiles.
Step 2
Dress lead into place 6” onto tiles, 3” onto the deck. We recommend using minimum 9” Code 4 lead cut into 1200mm lengths max.
Step 3
Fix into position using screws.
Step 4
Apply Techno primer to lead and rubber approx. 160mm wide using a scrubber pad and handle. Allow to go touch dry.
Step 5
Centralize the 6" batten cover strip and carefully remove release paper applying downward pressure. Use silicone roller to seal.
