Installation
Step by Step GuidesTechno Guides
Laying Membrane Edge Trims Gutter Trim External Edge Corner Wall Trim Flashing Under Tiles Onto Tiles Wall Trim Flashing External Corner (Skylight / Upstand) Internal Corner Pipeseal Seam / Join Rainwater Outlet Horizontal Rainwater OutletLineflex Guides
Lineflex Heat Weld Laying Lineflex Laying Lineflex With Spray Adhesive Laying Lineflex With Mechanical Fixings Edge Trim Gutter Trim External Edge Corner Under Tiles Onto Tiles External Corner Internal Corner Pipe Seal Felt Join Butt Join Rainwater Outlet Horizontal Rainwater Outlet
Butt Join Download PDF
A guide to butting two pieces of adjoining Lineflex Fleece Backed EPDM membranes.
Step 1
Position the Rubber Cover sheets side by side.
Step 2
Apply primer 85mm wide onto each sheet.
Step 3
Position cover tape along the seam area and remove the backing paper at a 45-degree angle.
Step 4
Thoroughly roller.
