Installation
Step by Step GuidesTechno Guides
Laying Membrane Edge Trims Gutter Trim External Edge Corner Wall Trim Flashing Under Tiles Onto Tiles Wall Trim Flashing External Corner (Skylight / Upstand) Internal Corner Pipeseal Seam / Join Rainwater Outlet Horizontal Rainwater OutletLineflex Guides
Lineflex Heat Weld Laying Lineflex Laying Lineflex With Spray Adhesive Laying Lineflex With Mechanical Fixings Edge Trim Gutter Trim External Edge Corner Under Tiles Onto Tiles External Corner Internal Corner Pipe Seal Felt Join Butt Join Rainwater Outlet Horizontal Rainwater Outlet
Gutter Trim Download PDF
Step by step guide on installing gutter-trims to your next EPDM Roofing project.
Step 1
Install a 2" x 1" batten to the roof perimeter , level with roof deck.
Step 2
Install the base plate as shown, 5mm below the deck using plain nails.
Step 3
Adhere membrane and dress over the base plate.
Step 4
Pull rubber taut and install top plate as shown, secured with polynails. Please allow a 5mm gap between trims for expansion and contraction.
Step 5
Trim any excess rubber with a sharp blade.
