Installation
Step by Step GuidesTechno Guides
Laying Membrane Edge Trims Gutter Trim External Edge Corner Wall Trim Flashing Under Tiles Onto Tiles Wall Trim Flashing External Corner (Skylight / Upstand) Internal Corner Pipeseal Seam / Join Rainwater Outlet Horizontal Rainwater OutletLineflex Guides
Lineflex Heat Weld Laying Lineflex Laying Lineflex With Spray Adhesive Laying Lineflex With Mechanical Fixings Edge Trim Gutter Trim External Edge Corner Under Tiles Onto Tiles External Corner Internal Corner Pipe Seal Felt Join Butt Join Rainwater Outlet Horizontal Rainwater Outlet
Under Tiles Download PDF
A guide to installing Lineflex Fleece Backed EPDM membrane under tiles.
Step 1
Carefully remove tiles and battens and place to one side.
Step 2
Fold the felt underlay up and tuck under existing tiles.
Step 3
Apply a thin coat of contact adhesive to the rubber membrane and lay board.
Step 4
Allow both surfaces to dry and, starting from the bottom, mate together, working the rubber into any angle changes.
Step 5
Reinstate the felt underlay and battens over the rubber.
Step 6
Reinstall the tiles.
