PVC Edge Trim

We are at the forefront of flat roofing technology and continuously seek new techniques and products that can help make installations faster, safer, better value or more reliable. Designed with the installer in mind, RubbaTrim comprises an Edge Trim and a two-piece Gutter Trim and is the perfect way to finish a single-ply flat roof.

As well as securing the perimeter of a new roof, the edge trims need to look good… and RubbaTrim looks fantastic! It is quick to install with very few components and represents outstanding value for money. Available in black or white, RubbaTrim is perfect for 045, 060, fleece backed EPDM and various single-ply membranes.

RubbaTrim is made from rigid pvc and is strong, colourfast and durable. It can be cut with a handsaw for ease of installation and is predrilled and supplied with stainless steel colour coded polynails for a truly professional finish.

How is it made?

RubbaTrim is made in the UK from durable PVC. Our manufacturer is accredited to BS EN ISO 9001 (2000) international quality assurance standard. All extrusions are manufactured in accordance with the rigorous controls required by the standard.

During production, extrusions are continuously monitored manually and by computer to ensure tolerances, colour and finish are all within specification. RubbaTrim is pre drilled and the Edge Trims are also prefoamed at the factory for a speedier installation.

How to install: Gutter Trims

1.

Our trims are designed to be installed onto a flat roof with no arris rails in place.

Secure a roofing batten (25mm × 50mm) to the perimeter ensuring that it is level with the decking.

2.

Align the top of the base plate approx 5mm below the top of the drip batten ensuring that the lip is at the bottom, pointing away from the roof.

Secure with the plain ring shank nails provided. It is advisable to leave a small gap between adjoining sections to allow for expansion/contraction.

3.

Dress the membrane over the base plate.

Ensure that the fixing holes will not align with those on the base plate, pull rubber taut and secure the top plate with the supplied coloured polynails. Ensure that the fixings are installed through the centre of the elongated slot to allow for expansion and contraction.

4.

It is advisable to drill a pilot hole in the base plate prior to fixing the top plate. The unique design will neatly sandwich the membrane in place. Install joining pieces as required and secure with mastic or polynails.

How to install: Edge Trim

1.

Dress the membrane over the pre installed drip batten. Compress trim and carefully secure in place with the supplied coloured polynails. Ensure that the fixings are installed through the centre of the elongated slot to allow for expansion and contraction.

2.

It is advisable to leave a small gap between adjoining sections to allow for expansion/contraction.

Use corners to finish.

How to install: Corners

1.

Corner trims provide a cost effective of joining two trims together for neat 90 degree corners. An internal corner for the Edge Trim is also available. Carefully remove both blanking plates with pliers, trim off any excess, drill pilot holes and secure with polypins. By removing one of the blanking plates with pliers, our corners neatly join an edge trim to a gutter trim.

2.

Carefully remove both blanking plates with a pair of pliers, trim off any excess with a sharp knife, drill pilot holes and secure wuth polypins.

3.

By just removing one of the blanking plates with pliers, our corners neatly join an edge trim to be a gutter trim.

4.

Our Gutter Trim Corners neatly seal the gutter.

RubberTrim Product Range

Edge Trim

Pre drilled and foamed, supplied with fixings and a joiner 2500mm long available in both black or white

View Product

Gutter Trim

Two piece, pre drilled, supplied with fixings and a joiner 2500mm long available in both black or white

View Product

External Edge Trim Corner

90 degree corner piece, supplied with two fixings 50mm × 50mm × 108mm available in both black or white

View Product

Internal Edge Trim Corner

90 degree corner piece, supplied with two fixings 50mm × 50mm × 108mm available in both black or white

View Product

External Gutter Corner

90 degree corner piece, supplied with two fixings 50mm × 50 mm × 72mm available in both black or white

View Product