Need help? Call us on 01494 461711
Free delivery & toolkit
Free delivery & toolkit

on orders over £350 ex VAT

Life expectancy
50 year life expectancy

free downloadable warranty

Secure payments
Secure payments

safe and secure online

  • RubbaTrim Fixing Nails
  • RubbaTrim Fixing Nails

RubbaTrim Fixing Nails

In Stock

Additional polynails can be purchased for the edge trim and gutter trim.

Available in Black/White and Anthracite.

£1.00

£1.20 inc. VAT

Additional polynails can be purchased for the edge trim and gutter trim.

Available in Black/White and Anthracite

SKU NAILSE

What is Tecno EPDM?

EPDM means ethylene propylene diene monomer. It is a synthetic rubber, with outstanding weatherproof properties, developed over 50 years ago.

I have never installed a rubber flat roof… is it easy?

Our Techno EPDM kits are specifically designed for the competent DIYer.  Some roofs are very easy to weatherproof, particularly freestanding roofs etc. Some roofs require more expertise e.g. roofs with multiple skylights or awkward pipes and apertures.

Do I need specialist equipment to install my new rubber roof?

You should only need basic hand tools for a straightforward roof. e.g. tape measure, shovel, broom, hammer, handsaw, rubbish bags etc.

How long does it take to install?

The average (20m2) rear extension should only take a morning to install. Getting the roof stripped off and any decking replaced if needed usually takes longer than installing the Techno EPDM.

I am worried about stripping off my old roof and leaving it exposed to the elements!

We strongly advise our clients to check both the weather forecast and that they have the correct materials on site prior to starting. The beauty of the Techno system is that if you do get caught in an unexpected shower you have a pre-cut weatherproof sheet to hand... which you can use as a tarpaulin!

Do I need to strip off my old roof?

It depends if the timber substrate is sound. If there has been a long-term leak, or the decking is chipboard, then the roof may need re-boarding in places. If the substrate is sound and the felt cleaned of dust etc then the EPDM can probably be adhered directly to it using contact adhesive (although this is trickier to install).

To save the time and expense, some customers simply overboard their roofs with new ply or OSB, screwing into the existing substrate.

Is there an up or down when installing the rubber?

Techno EPDM is identical on both sides.

Are the products safe to use?

Yes, all products are supplied with clear instructions. Sensible precautions should be taken i.e. do not inhale adhesive fumes, do not allow children access to the products etc.

How long will my roof last?

Your new Techno EPDM membrane is guaranteed not to fail due to weathering for 20 years. It is essential that the product is installed in accordance with our detailed instructions.

Is Techno EPDM environmentally friendly?

Yes, EPDM is an inert material with limited environmental impact during manufacture and installation process.

Can I use Techno EPDM in really hot or really cold weather?

For the best results use in mild conditions, the adhesives should not be used if temperatures are likely to be below 5 degrees Celsius within 24 hours.

Can I use Techno EPDM on top of insulation boards to create a warm roof?

We recommend a ply faced insulation board e.g. Kingspan TR31 or similar. Alternatively, you can insulate on top of the decking with foil faced boards, then overboard with OSB or plywood, secured with long screws.

Can I adhere Techno directly to felt, fibreglass, asphalt or concrete?

Our contact adhesive can be used for this type of application but, unlike our water-based glue, this is quite tricky to do on large areas. We strongly recommend over boarding roofs with a minimum 12mm ply or OSB and using the water-based glue.

Can I walk on my new Techno EPDM roof?

The membrane is incredibly tough and perfect for maintenance access. For balconies etc then we would recommend additional protection. E.g. paving slabs, walkway pads or timber decking.

My EPDM appears to be quite chalky, is that OK?

Chalk is used in the manufacturing process to prevent the membrane sticking together. It will gradually weather off and does not affect its lifespan.

I have some wrinkles in my rubber roof, is this a problem?

There may be wrinkles or creases in the membrane. These may be caused in manufacturing or shipping. Open out and allow the membrane to "relax" for as long as possible prior to adhering. For stubborn creases, a gentle heat source (e.g. a heat gun or hairdryer) should be applied prior to adhering.

There are joins in the rubber, why is this?

Firestone RubberCover EPDM is manufactured in Saudi Arabia and the large panels are created using vulcanised seams.  The material of these seams is homogenous and 100% cured.

Can I install EPDM in the rain?

The water-based adhesive will work on damp timber but is not designed to be used in the rain. Contact adhesives will only work on dry substrates

Can I install a cement screed on top of EPDM to create a walkway or balcony?

Techno EPDM is perfectly compatible with sand and cement.

What is the biggest size of Techno that you stock?

Our largest 045 (1.2mm) roll is an incredible 12.2m x 30.5m (40ft x 100ft). Our largest 060 (1.52mm) roll is an incredible 12.2m x 30.5m.

My EPDM roof has been damaged, can it be repaired?

EPDM roofs can be easily repaired using the Techno 9" Flashing Tape and primer, cut the Flashing Tape to the desired shape and size, prime the area, allow to go touch dry. Peel the backing paper off and mate the surfaces together. Roller using a silicone roller.

There appear to be small holes in the membrane: is it faulty?

The appearance of small holes in the membrane is called "pockmarking" and it's quite commonplace with EPDM. The EPDM manufacturing process involves laminating two layers of rubber together, and so any indentation in one sheet will be sealed by the second layer. The EPDM we receive passes strict internal quality control measures, and the 20-year warranty remains unaffected.

Carriage is free for all orders over £350.00 + VAT.

Tuffnells Logo Up to £149.99 £150.00 – £199.99 £200.00 – £349.99 £350.00+
DX Courier Next working day delivery £20.00 £25.00 £30.00 FREE
Pickup Collect directly from our premises in High Wycombe. FREE

Our streamlined operation means that orders placed before 14.30 will normally be despatched same day. (mainland UK only).

Please make sure all items are in good condition before signing the carrier’s delivery note. This includes opening and checking all items. In the unlikely event of damages, any damaged items need to be clearly marked on the drivers manifest, and reported immediately, so that replacements can be sent. Failure to highlight any shortages or damages at the time of delivery may mean that replacements cannot be sent free of charge.

Please check the number of items you are signing for, if any items are missing or damaged please sign the paperwork accordingly and notify us immediately, any shortages or damages within the order must be notified within 72 hours.We aim to deliver all our products in perfect condition. On rare occasions however, our metal adhesive tins get dented in transit. Minor dents are not a problem and will not affect the performance or application of the glue. In the unlikely event of any spillage then please notify the carrier and ourselves in the first instance.

We are not liable for any consequential costs that may arise from any errors or failed deliveries, however caused. We strongly recommend that you have all the checked materials on site prior to bringing in any sub contract labour as we cannot be held liable for any shortages or failures to deliver that may occur.

Any consignment that, on the instruction of the purchaser, is to be left by our carrier unsigned and unchecked, is at the risk of the purchaser. Rubba-Seal cannot be held responsible for any damages or shortages that may have occurred.

A 10% restocking charge plus carriage costs is payable on any product returns.

Free delivery is for the UK mainland only, some deliveries to Islands/Northern Ireland and Scottish Highlands may incur a further charge.

We are unable to ship to any of the Channel Islands (Guernsey/Jersey/Sark).

RubberRoofs friendly helper, Roofus

Looking for help or advice?

Installing your own flat roof couldn't be easier - we have a range of tools to help with your flat roof installation, and we offer detailed PDFs, online videos, and our fantastic online calculator. If you still can't find what you need, please email us at info@rubberroofs.co.uk or call 01494 461711.

Roof Calculator Get in touch