Need help? Call us on 0800 2061277 / 07900 916500

Recently added item(s) ×

You have no items in your shopping cart.

FREE DELIVERY & TOOLKIT on orders over £250
50 Year Life Expectancy
Maintenance FREE
BBA Approved - What's this?

How to fit EPDM Edge Trim

Step 1

Secure wall trim in place with the fixing supplied and seal the chase with warm mastic.

Step 2

Pull membrane taut and install the top section of gutter trim with the colour coded fixing supplied. We suggest drilling a pilot hole in cold conditions.

Step 3 

Leave a 5 mm gap between adjoining trims, to allow for expansion and contraction. Trim off excess rubber and secure joiner with the fixing or mastic.

Step 4 

Neatly fold the rubber where the edge trim meets the gutter trim.

Step 5 

Starting at the gutter edge, apply downward pressure to the edge trim and secure with the colour coded fixings.

Step 6 

Leave a 5 mm gap between adjoining trims, to allow for expansion and contraction. Trim off excess rubber and secure joiner with a fixing or mastic.

Step 7 

Any small gap between the gutter trim and edge trim, can be sealed with black mastic.